Filter
Top Products
Wireless Adapter RNX-G300EX/LX User Manual
- 77 -
LINK STATUS
Figure 2-9 is the link status page, it displays the detail information current connection.
Figure 2-9 Link Status function
A. Status : Current connection status. If no connection, if will show Disconnected. Otherwise, the SSID and BSSID will show
here.
B. Extra Info : Display link status in use.
C. Channel : Display current channel in use.
Authentication : Authentication mode in use.
D. Encryption : Encryption type in use.
E. Network Type : Network type in use.
IP Address : IP address about current connection.
F. Sub Mask : Sub mask about current connection.
G. Default Gateway : Default gateway about current connection.
H. Link Speed : Show current transmit rate and receive rate.
I. Throughout : Display transmits and receive throughput in unit of Mbps.
J. Link Quality : Display connection quality based on signal strength and TX/RX packet error rate.
K. Signal Strength 1 : Receive signal strength 1, user can choose to display as percentage or dBm format.
L. Signal Strength 2 : Receive signal strength 2, user can choose to display as percentage or dBm format.
M. Signal Strength 3 : Receive signal strength 3, user can choose to display as percentage or dBm format.
N. Noise Strength : Display noise signal strength.
O. HT : Display current HT status in use, containing BW, GI, MCS, SNR0, and SNR1 value.
(Show the information only for 802.11n wireless card.)