Filter
Top Products
Wireless RouterRNX-N400LX User Manual
Item Description
Fragment
Threshold
Set the data packet fragmentation threshold, value can be written
between 256 and 2346 bytes. This specifies the maximum size of a
packet during the fragmentation of data to be transmitted. If you set
this value too low, it will result in bad performance
RTS Threshold
Set the RTS Threshold, value can be written between 0 and 2347
bytes. When the packet size is smaller than the RTS threshold, the
wireless router will not use the RTS/CTS mechanism to send this
packet.
Beacon Interval
Set the Beacon Interval, value can be written between 20 and 1024
ms. This is the interval of time that this wireless router broadcasts a
beacon. A Beacon is used to synchronize the wireless network.
Preamble Type
Click to select the Long Preamble or Short Preamble support on the
wireless data packet transmission. The “Long Preamble” can provide
better wireless LAN compatibility while the “Short Preamble” can
provide better wireless LAN performance.
IAPP (Inter
Access Point
Protocol)
Click to enable or disable the IAPP function.
Protection
Protect 802.11n user priority.
Aggregation
Click to enable or disable the Aggregation function.
Short GI
Click to enable or disable the short Guard Intervals function.
RF Output
Power
To adjust transmission power level.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
23