Rosewill RNX-N400LX Network Router User Manual


 
Wireless RouterRNX-N400LX User Manual
implemented to close the PPPoE connection while there are no data
sent out longer than the idle time set.
Manual connection type means to setup the connection through the
PPPoE protocol by clicking the Connect button manually, and
clicking the Disconnect button manually.
Idle Time
If you select the PPPoE and Connect on Demand connection type,
fill in the idle time for auto-disconnect function. Value can be
between 1 and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is 1400.
Attain DNS
Automatically
Click to select getting DNS address for DHCP support.
Please select Set DNS Manually if the DHCP support is selected.
Set DNS
Manually
Click to select getting DNS address for DHCP support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC
Address
Fill in the MAC address that is the MAC address to be cloned.
Enable uPNP
Click the checkbox to enable uPNP function.
Enable IGMP
Proxy
Click the checkbox to enable IGMP Proxy.
Enable Ping
Access on WAN
Click the checkbox to enable WAN ICMP response.
Enable Web
Server Access on
WAN
Click the checkbox to enable web configuration from WAN side.
Enable IPsec
pass through on
VPN Connection
Click the checkbox to enable IPSec packet pass through.
Enable PPTP
pass through on
VPN Connection
Click the checkbox to enable PPTP packet pass through.
Enable L2TP
pass through on
VPN Connection
Click the checkbox to enable L2TP packet pass through.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.424 WAN Interface Setup – PPTP
36