Filter
Top Products
3. Installation
RuggedCom® RuggedBackbone™ 22 RX1510 Installation Guide Rev 104
3.2.5. DC Power Supply Wiring Examples
+
+
Figure 3.13. Wiring for Two DC Power Supplies (24P or 48P modules shown)
• For 125/230VAC rated equipment, a appropriately rated AC circuit breaker must be
installed.
• It is recommended to provide a separate circuit breaker for each power supply
module.
• Equipment must be installed according to applicable local wiring codes.
3.2.6. AC and DC Power Supply Wiring Example
+
Figure 3.14. Wiring for AC and DC Power Supplies (HIP module shown at left; 24P or 48P module shown at right)