Runco 1080p Projector User Manual


 
Installation
Runco VX-44d/-55d Owner’s Operating Manual 43
PRE
L
IMINAR
Y
3. Grasp the lens by the front ring and rotate the lens until the image is properly
anamorphic:
4. When the image geometry appears correct, tighten the three Lens
Rotation Set Screws to secure the lens in place. (When viewed
from the front, the rear opening on the anamorphic lens should
appear as a tall, narrow oval.)
Focus: Finally, rotate the Focus Ring on the anamorphic
lens to fine-tune the optical focus. When finished,
hand-tighten the Focus Rotation Set Screw to lock the
lens in position.
Wrong Position Correct Position
F
O
C
U
S