Filter
Top Products
Operation
Runco VX-44d/-55d Owner’s Operating Manual 71
PRE
L
IMINAR
Y
Overscan: Image Overscan pushes the outside edge of the active picture area of the
video signal out beyond the edge of the display area.
Some television programs are produced based on the assumption that older television
sets may not display the outer edges of the broadcast picture area. Over scan effectively
trims away these inactive, outer edges and enlarges the remaining portion of the image to
fill the display area.
Select from 1% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or
desirable.
ISF PresetsFor each input, the VX-44d/-55d lets you save image quality settings as presets that you
can recall at a later time. You can create up to four presets per input and resolution. Use
the ISF Presets menu to recall saved image presets, or to save image settings in the
“Custom
1” or “Custom 2” memory location. The currently-selected preset is indicated by
a “
7” to its left; in the example shown here, ISF Night is selected.
You should save changes to any of the following settings to a preset; otherwise they will
be lost when a new input source or resolution is selected:
• Brightness
•Contrast
• Color saturation
•Tint
• Sharpness
To reset the Custom 1 and Custom 2 image presets to their factory defaults, select
Factory Default and press ENTER.
InformationSelect Information from the Main Menu to see information that uniquely identifies your
DHD Controller: its serial number, the installed hardware and firmware versions and the
firmware version build date. Should you ever need to contact Runco Technical Support,
this information will help them answer your questions or resolve product performance
issues.
ISF Presets
7
ISF Night
ISF Day
Custom 1 Save
Custom 2 Save
Factory Default
Information
Serial Number
Hardware 0
Firmware 0100.013A
Date Nov 17 2006