Filter
Top Products
33
Runco CL-610 Owner’s Operating Manual
The CL-610 has six memory settings for Color Temperature. Four of these settings
are factory set to default as follows:
0 -- Original lamp color temperature
1 -- 5400 kelvins
2 -- 6500 kelvins
3 -- 8500 kelvins
4 -- Custom
5 -- Custom
Custom 4 and 5 memory are installer-adjustable and can be used to create custom
settings. There are nine adjustable “white balance” parameters available for the Custom
4 and 5 settings (three each for red, green and blue). These are described later in this
section; refer to “Set Up.”
NOTE: You must enter a passcode in order to enter the Set Up menu.
Use the ICC Selection menu to select the color space that is appropriate for the
source signal, to achieve optimal color balance.
NOTE: The International Color Consortium (ICC) is a group of imaging product vendors
that promotes and develops cross-platform, vendor-neutral color measurement and
management standards.
If you select NTSC, HDTV or PAL, you can make further adjustments to individual color
characteristics in the ICC Adjust sub-menu under the ISF Calibration menu, described
later in this section. (The Standard color is factory-set and not adjustable.)
Once the desired adjustments have been entered, select Store Image Settings to
save these settings into the “Memory 1” memory location.
To recall stored custom image quality settings, select Restore Image Settings and
choose “Memory 1,” “ISF Night” or “ISF Day.”
➤
Color Temperature
Color Temperature
2 - +
On-Screen Display Menus
➤
Store Image Settings
➤
Restore Image Settings
➤
ICC Selection