Filter
Top Products
17
PROJECTOR OPTIONS
The projector options menu allows you to make adjustments to a number of projector functions. The
MENU options allow you to make adjustments to the on-screen menu such as display time, menu
items, etc.
MENU OPTIONS
There are two pages of the menu options menu. On PAGE 1, the following adjustments can be made:
MENU MODE sets the menu to either ADVANCED or BASIC/CUSTOM full time. In other words, if you
set this for Advanced, every time you access the menu it will always be in the advanced mode.
BASIC/CUSTOM MENU EDIT allows you to add or remove menu items from the Basic menu.
LANGUAGE allows you to change the language of the on-screen menus. Choose from English,
German, French, Italian, Spanish, Swedish and Japanese.
MENU DISPLAY TIME allows you to change the amount of time it takes for the on-screen menu to
'time out' or disappear from the screen. Choose from either MANUAL (in which you must manually
remove the menus with the cancel button), Auto 5 secs, Auto 15 secs and Auto 45 secs. Runco rec-
ommends that this be left in Auto 5 secs.
On PAGE 2 of the Menu Options Menu, the following may be adjusted:
SOURCE DISPLAY ON/OFF: When the source is changed, this will enable or disable the on-screen
display to report which source it was changed to.
NO INPUT MESSAGE: When the projector does not see a signal on the currently selected source,
this will enable or disable a "No Input" message from appearing on-screen.
VOLUME BAR
and KEYSTONE BAR are not used with this version.
Main Menu
Aspect Ratio
Source Select
Picture
Image Options
Color Management
Projector Options
Tools
Help
Menu
Setup