Filter
Top Products
2
Introduction
OVERALL DESCRIPTION
Congratulations on your purchase of the DR-300 projector! The projector is a single-chip DLP™ pro-
jector with native XGA (1024 x 768) resolution. It includes a bright 135W NSH lamp as its light source,
and requires very little maintenance. It is capable of displaying all currently available DTV formats (via
an external DTV decoder, not included), as well as computer resolutions from VGA to UXGA.
The projector is packed full of important features that are necessities in a home theater. For example,
the projector has aspect ratio control built-in, and can be configured for 4:3 or 16:9 screens, and can
also be configured for use with an anamorphic lens. Also, it can sense whether a high-resolution input
signal is RGB or component and adjust itself automatically, making this projector very user-friendly.
This manual will guide you through the operation of your DR-300 projector. Please read through it
before operating your projector, and keep it as a reference for the future.
FEATURES AND BENEFITS
The DR-300 projector has many unique and important features. They include:
• Built-in aspect ratio control for 16:9 or 4:3 screens
• Projector can be configured for use with an anamorphic lens
• Native 1024 x 768, Widescreen 1024 x 576
• 135W NSH lamp
• 1000 ANSI lumens light output
• Electronic keystone correction
• Manual Zoom and Focus
• DTV capable (via outboard DTV decoder); 480p, 540p, 720p and 1080i formats
• NTSC/PAL/SECAM compatible
• Capable of displaying computer resolutions from VGA to UXGA
• Ceiling or floor, front or rear projection
• Expanded color balance controls
• Auto-switching between RGB and component
• Optimized for use with progressive DVD players