Filter
Top Products
20
SHARPNESS adjusts the amount of high-frequency detail in the image. This can be adjusted to the
preference of the user. Keep in mind that when SHARPNESS is decreased, fine details in the image
will become 'soft'; when it is increased, fine details will become sharper but will also make the picture
appear 'noisy' if adjusted too high.
LUMA
ENHANCE* acts as an edge enhancement, especially around black to white transitions in the
image. Essentially, this has the same characteristics as sharpness but affects the edges of objects far
more that the rest of the image.
FREQUENCIES HIGH/LOW affect the overall range of the LUMA ENHANCE feature. For example, if
using a lower-quality video source such as a VCR, the FREQUENCIES should be set to LOW. For a
good quality source such as a DVD player, set FREQUENCIES to HIGH. To set FREQUENCIES,
press ENTER while LUMA ENHANCE is on-screen.
CHROMA
ENHANCE* acts as an edge enhancement, especially around color transitions in the
image. Essentially, this has the same characteristics as sharpness but affects the edges of objects
far more that the rest of the image.
FREQUENCIES HIGH/LOW affect the overall range of the CHROMA ENHANCE feature.
For example, if using a lower-quality video source such as a VCR, the FREQUENCIES should be set
to LOW. For a good quality source such as a DVD player, set FREQUENCIES to HIGH.
To set FREQUENCIES, press ENTER while CHROMA ENHANCE is on-screen.
COLOR
TEMPERATURE* sets the overall color temperature of the image. The range is from 55 to
115. Multiply by 100s for approximate color temperature 5500 - 11500
o
K.
COLOR BALANCE* adjusts the actual grey scale of the image. You may adjust the amount of Red,
Green or Blue in the image as needed. There are 9 adjustments: GAMMA is 30-70% Gray, OFFSET
is 1-29% and GAIN is 70-100% GRAY.
COMPOSITE
S-CVIDEO
COMPONENT
RGB HD
COMPONENT HD
DVI
* 480i and HD Sources can be adjusted separately
* Active only when the Installation mode is enabled (page 21).
480i Sources
HD Sources