Runco VX-1000CI Projector User Manual


 
23
The 'Quick Menu' allows you to make adjustments to the displayed image without having to go
through the standard menu.
The Quick Menu allows the adjustment of Brightness, Contrast, Color, Tint, Sharpness, Image
Shift, Color Temperature and 9 point Color Balance with any of the three standard inputs
(Composite, S-Video, Component) or Component HD. In RGB HD or DVI, only Brightness,
Contrast, Shift, Color Temperature and 9 point Color Balance are available.
To use the quick menu, press ENTER on the front panel, and observe the front panel display.
The following will be displayed (except the DVI input):
Quick Menu
The first mode of the Quick Menu is BRIGHTNESS. When this is displayed, press the up or down
arrows to adjust the brightness. For all of the adjustments, the quick menu will time-out 10 seconds
from the last button press, so ensure that you make the adjustments within that time.
If you do not need to make any brightness adjustments or you have completed making them, press
ENTER again to display the next mode of the shift menu, which is for CONTRAST (except the DVI
input):
To adjust CONTRAST, press the up or down arrow buttons. Once the adjustments have been
completed, or no adjustment was needed, press ENTER. The next mode of the quick menu will be
displayed, which is for COLOR (except RGB and DVI inputs):
To adjust COLOR, press the up or down arrow buttons. Once the adjustments have been completed,
or no adjustment was needed, press ENTER to display the next mode of the Quick Menu, which is
TINT (except RGB, Computer and DVI inputs).
Quick Menu: BRIGHTNESS
Press arrows or enter...
Quick Menu: CONTRAST
Press arrows or enter...
Quick Menu: COLOR
Press arrows or enter...