Samsung 1100MB Computer Monitor User Manual


 
Visit the video card maker's homepage and download and install the latest driver.
For more information about the video card, contact the card manufacturer.
To ensure normal operation, please restart your system.
An error occurs when the system is not restarted after installing MagicTune.
(This is for Win98SE and WinMe only.)
Restart the system before use.
For the best performance of MagicTune, adjust to the optimal resolution. Refer to the User
Guide for the optimal resolution.
If you do not adjust to the optimal resolution and perform Color Calibration, the
monitor cannot be adjusted to the optimal condition.
Refer to the manual for the optimal resolution.
This video card does not support MagicTune.
Please install a new video card driver.
An error occurs when the video card driver is not installed properly.
This happens when the current video card list is not displayed normally. You can
check this from Start > Setup > System > Hardware > Device Manager > Display
Adapter.
Visit the video card manufacturer's homepage and download and install the latest
driver.
For more information about the video card, contact the card manufacturer.
As the Highlight program uses the communication lines,
please exit the Highlight program before you can access MagicTune.
Some of Samsung CDT monitors support the Highlight feature.
When using both the Highlight feature and MagicTune simultaneously, conflicts
occur, which cause errors.
Make sure to turn OFF Highlight before using MagicTune.
Troubleshooting
z
MagicTune may not work in case monitor is replaced or driver of graphic card is updated while
MagicTune is operating. If so, please restart the system.
Symptom Check List Solutions
Check when
MagicTune does not
function properly.
MagicTune feature is found
only on PC (VGA) with
Window OS that supports
Plug and Play.
* To check whether your PC is available for
MagicTune feature, follow the
steps below (When Windows™ is XP);
Control Panel -> Performance and Maintenance
-> System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play
monitor, find 'Plug and Play monitor' by
searching new Hardware.
MagicTune is an additional software for the
monitor. Some graphic cards may not support
your monitor. When you have a problem with