Filter
Top Products
2
Safety Instructions
1
Before connecting the AC power cord to the DC adapter outlet, make sure the voltage
designation of the DC adapter corresponds to the local electrical supply.
2
Never insert anything metallic into the openings in the cabinet of the flat panel display
(FPD) monitor; doing so may create the danger of electric shock.
3
To avoid electric shock, never touch the inside of the FPD. Only a qualified technician
should open the case of the FPD.
4
Never use your FPD if the power cord has been damaged. Do not allow anything to rest on
the power cord, and keep the cord away from areas where people can trip over it.
5
Be sure to hold the plug, not the cord, when disconnecting the FPD from an electric socket.
6
Openings in the FPD cabinet are provided for ventilation. To prevent overheating, these
openings should not be blocked or covered. Also, avoid using the FPD on a bed, sofa, rug,
or other soft surface. Doing so may block the ventilation openings in the bottom of the
cabinet. If you put the FPD in a bookcase or some other enclosed space, be sure to provide
adequate ventilation.
7
Put your FPD in a location with low humidity and a minimum of dust.
8
Do not expose the FPD to rain or use it near water (in kitchens, near swimming pools, etc.).
If the FPD accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the FPD with a damp cloth when necessary, but be sure to unplug the FPD
first.
9
Place the FPD on a solid surface and treat it carefully. The screen is made of thin glass
with a plastic front surface and can be damaged if dropped, hit or scratched. Do not clean
the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl acid,
methyl, or chloride – these may damage the panel.
10
Locate your FPD near an easily accessible AC outlet.
11
If your FPD does not operate normally – in particular, if there are any unusual sounds or
smells coming from it – unplug it immediately and contact an authorized dealer or service
center.
12
High temperature can cause problems. Don’t use your FPD in direct sunlight, and keep it
away from heaters, stoves, fireplaces, and other sources of heat.
13
Unplug the FPD when it is going to be left unused for an extended period of time.
14
Unplug your FPD from the AC outlet before any service.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
E2 Page 2 Friday, August 11, 2000 2:57 PM