Samsung BN68-01416D-00 Computer Drive User Manual


 
English - 40
4.5 Common Interface
− Installing the CI Card
Purchase the CI CAM module by visiting your nearest
dealer or by phone.
Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
Insert the CAM with the CI CARD installed into the
common interface slot.
Insert the CAM in the direction of the arrow, right up
to the end so that it is parallel with the slot.
Check if you can see a picture on a scrambled signal
channel.
You can install the CAM anytime whether the TV is
ON or OFF.
− Application Info.
This contains information on CAM inserted in the CI slot and
displays it.
Press the ENTER button to display the information for your application.
− CI Menu
This helps the user select an item from the CAM-supported menu.
Press the ENTER button. The options of the selected menu are displayed.
Pressthe▲or▼buttontoselecttherequiredoption,thenpressthe
ENTER button.
Select the CI Menu based on the PC Card menu.
4.6 System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
Press the ENTER button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
Continued...
CI Menu
Move Enter Exit
Type: CA
Manufacturer: Canal Plus
Info: Top Up TV
Application Info.
Return
DTV
System
Setup
Move
Enter
Return
DTV
Product Information
Signal Information
Software Upgrade
Reset
System
Move
Enter
Return
DTV
Software Version: T-PERLDEUC-1004
Firmware Version: T-EMMAZDEUB-0106
Product Information
Return
DTV
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Signal Information
Return
DTV
BN68-01416D-Eng.indb 40 2008-2-29 15:29:46