Filter
Top Products
Troubleshooting_81
Send Error
(Wrong Config)
There is a problem on
the network interface
card.
Configure your network
interface card correctly.
Toner Empty
T
A toner cartridge has
almost reached its
estimated cartridge
life.
W Stop X
Samsung
does not
recommend
using non-
genuine
Samsung
toner cartridge
such as
refilled or
remanufactured.
Samsung cannot
guarantee non-
genuine Samsung
toner cartridge's
quality. Service or
repair required as a
result of using non-
genuine Samsung
toner cartridges will
not be covered under
the machine warranty.
You can choose among
Stop, Continue or
Black Only as shown on
the control panel. If you
select Stop, the printer
stops printing and you
cannot print any more
without changing the
cartridge. If you select
Continue, the printer
keeps printing but the
printing quality cannot
be guaranteed. If you
select Black Only, the
machine prints the data
in black only.
Replace the toner
cartridge for the best
print quality when this
message appears. Using
a cartridge beyond this
stage can result in
printing quality issues.
See page 67.
If the black toner
cartridge is
empty, Black
Only message
does not appear.
Toner Exhausted
T
A toner cartridge has
reached its estimated
cartridge life. The
printer stops printing.
Estimated
cartridge life
means the
expected or
estimated
toner cartridge
life, which
indicates the
average capacity of
print-outs and is
designed pursuant to
ISO/IEC 19798. (See
Specification on page
99.) The number of
pages may be
affected by operating
environment, printing
interval, media type,
and media size. Some
amount of toner may
remain in the cartridge
even when "Toner
Exhausted" appears
and the printer stops
printing.
Replace the toner
cartridge. See page 67.
MESSAGE MEANING
SUGGESTED
SOLUTIONS
Toner Low
T
Small amount of toner
is left in the cartridge.
The estimated
cartridge life of toner
is close.
Prepare a new cartridge
for replacement. You
may temporarily
increase the printing
quality by redistributing
the toner. (See page 66.)
Tray 2
Paper jam 0
Paper has jammed In
the paper feed area.
Clear the jam. See page
73.
Updating Data
Please Wait...
This message
appears when there is
a change in the
system setting or
when you back up a
data.
Do not turn the power off
when this message is
showing. Changes may
not be saved and datas
can be lost.
MESSAGE MEANING
SUGGESTED
SOLUTIONS