Filter
Top Products
Tone
You may often need to use Touch Tone dial signals to perform special
operations by phone. Bank-by-phone and voice mail are two examples of
systems that require these signals. If you have pulse service, you can still
send Touch Tone signals by following these steps.
1. Dial the number using pulse dialing.
2. When the remote phone answers, press . Any numbers you now press
will be sent as Touch tones for the remainder of the call.
3. Dial the remaining numbers required by the service. The machine
returns to the pulse mode after you finish the call.
Flash
Some special phone services require a switch-hook signal for proper
operation. For example, if you have call waiting, you can put a call on hold
and take a second call on the same line by pressing the switch-hook button.
Pressing Flash performs the equivalent of a switch-hook operation.
1. When you are on the telephone and hear the call waiting signal, press
Flash once. The first caller is on hold and you are speaking to the
second caller.
2. Press Flash again to talk to the first caller again.
Note: If you do not have a special service that uses the switch-hook signal, donÕt
press
Flash
during a call. If you do, you could disconnect the line.
2.34
Other Functions