Samsung NC220 Computer Monitor User Manual


 
Installing the Product 2-5
2-5 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Installing a Wall-mount Kit or Desktop Stand
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit
or desktop stand you want to attach.
Using a screw longer than the standard length can damage the internal components of the product.
The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the
specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using
excessive force. The product may get damaged or fall and cause persona linjury. Samsung shall not be held liable for any
damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one
specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
Place a protective cloth or cushion on a flat
surface. Next, place the product with the face
down on top of the cloth or cushion.
Unfasten the screw from the back of
the product.
Lift and detach the stand.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)