Samsung NC240 Computer Monitor User Manual


 
4-1 Installing the Software
If the <PCoIP Device Name> allows the administrator to give the Host or Portal a logical name. The default is pcoip-host-
MAC or pcoip-portal-MAC where MAC is the Host or Portal’s MAC address.
<PCoIP Device Description>
The <PCoIP Device Description> allows the administrator to give the Host or Portal a description or more information, e.g.
location of endpoint, etc.
The <PCoIP Device Description> is not used by the PCoIP Firmware and is provided strictly for administrator use.
<Generic Tag>
The <Generic Tag> allows the administrator to give the Host or Portal a generic tag information.
The <Generic Tag> is not used by the PCoIP Firmware and is provided strictly for administrator use.
<Connection Management> Tab
The <Connection Management> tab allows enabling or disabling connection management, and to specify the IP address of
the connection manager.
In a managed connection, an external <Connection Managerment> Server communicates with and can remotely control and
configure the device. Additionally, the connection manager can locate an appropriate peer for the device to connect to and
initiate the connection. <Connection management> can greatly simplify the administration effort for a large, complex system.
The Connection Management parameters can also be configured using the Webpage Administration Interface.
Figure : <Connection Management> Configuration
<Enable Connection Management>
If the <Enable Connection Management> option is enabled, the device can be configured and controlled by an external
connection manager.
<Identify Connection Manager By>
The <Identify Connection Manager By> selector allows the administrator to choose whether the connection manager is
identified by <IP address> or by Fully Qualified Domain Name (FQDN). If connection management is disabled, this field is
not required and is not editable.
Table 2-1 shows the configuration parameters available when either method is chosen. If an invalid IP address or DNS
name is entered, the OSD will prompt the administrator to correct it.
Table 2-1: Connection Manager Method
<Enable Event Log Notification>
The <Enable Event Log Notification> field controls whether the PCoIP Host and Portal devices send the contents of their
event logs to the connection management server.
METHOD DATA FIELDS
<IP address> Connection Manager IP Address
<FQDN> Connection Manager DNS name
2-6