Filter
Top Products
4-1 Installing the Software
• <Session Type>
The <Session Type> allows the administrator to configure the Portal for a PCoIP session or RDP session.
• <Identify Peer By>
The <Identify Peer By> selector allows the administrator to choose whether the peer device is identified by IP and MAC
address or by Fully Qualified Domain Name (FQDN).
Table 2-2 shows the peer identity parameters available when either method is chosen. If an invalid IP address or DNS
name is entered, the OSD will prompt the administrator to correct it.
Table 2-2: Peer Identity Methods
• <Enable Auto-Reconnect>
The <Enable Auto-Reconnect> ption allows the Portal to automatically reconnect with the last connected Host when a
session is lost.
<RDP>
The <RDP> tab allows the administrator to configure settings specific to the Remote Desktop Protocol (<RDP>).
The RDP parameters can also be configured using the Webpage Administration Interface.
Figure : <RDP> Configuration
PEER IDENTITY METHOD DATA FIELDS COMMENT
Peer IP/MAC Peer IP Address PCoIP or Portal RDP client
Peer MAC Address PCoIP
Peer FQDN Peer FQDN PCoIP or Portal RDP client
2-9