Filter
Top Products
4-1 Installing the Software
• <Repeat Settings Test Box >
The <Repeat Settings Test Box> field allows a user to test the chosen keyboard settings.
<Image>
The <Image> allows a user to change the image settings on the PCoIP system.
• The Image parameters can also be configured using the Webpage Administration Interface.
Figure : <Image>
• <Minimum Image Quality>
The <Minimal Image Quality> slider allows a user to make compromises between image quality and frame rate when
network bandwidth is limited. Some usage cases may require lower-quality images at a higher frame rate, while in other
cases higher-quality images at a lower frame rate may be preferred.
In environments where network bandwidth is constrained, moving the slider towards <Reduced> allows higher frame
rates; moving the slider towards <Perception-Free> allows higher image quality.
When network bandwidth is not constrained, the PCoIP system will maintain <perception-free> quality regardless of the
<Minimum Image Quality> setting.
<Password> Window
The <Password> window allows an administrator to update the administrative password for the device. Note that this will affect
the web interface and the local <OSD> GUI.
• Care must be taken when updating the Portal Password as the Portal may become unusable if the password is lost.
• The Password can also be updated using the Webpage Administration Interface.
• Some PCoIP devices have password protection disabled by default and this <Password> window is not available.
Password protection can be enabled through PCoIP Management Console for these devices.
Figure : <Change Password>
2-21
2-22