Filter
Top Products
29
Operating Your Printer
Button Function
FUNCTION USAGE
On-line/Off-line Pressing the button toggles the printer
between on-line (READY light on) and off-line
(READY light off) status.
Manual Feed Start When you print a file if you have selected
`Manual FeedÕ source, the printer waits you to
feed paper into the manual feeder. When you
are ready, press and hold down the button for
about 2 seconds.
The printer pulls in the page, and starts
printing.
Press the button each time you feed paper
manually.
Reset To clear all data from the printerÕs memory
except permanent fonts and macros, and then
restore the user default settings:
Press the button to turn the printer off-line.
With the READY light off, press and hold
down the button until all lights are blinking
(approximately four seconds), then release the
button.
Self-test To perform a printer self-test:
While the printer is on-line (READY light on),
press and hold down the button until all three
lights are blinking (approximately four
seconds), then release the button. A one-page
printer status sheet will be printed.
To remove excess toner from the image
cartridge: While the printer is on-line (READY
light on), press and hold down the button until
all three lights remain lit (not blinking;
approximately seven seconds) and the printer
begins to cycle up (starts feeding paper), then
release the button. One sheet will be printed.
Image Cartridge
Cleaning
03-Troubleshooting 5/10/99 4:04 PM Page 3