Filter
Top Products
iv
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has
a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13
amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do
not use the plug until you have another fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.
Warning
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it
into a socket.
Important warning: You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
•Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do the
following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the
safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored
black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored
red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
EU Declaration of Conformity (LVD, EMC)
For the following product :
Manufactured at :
W e hereby declare, that all major safety requirements, concerning to CE Marking
Directive[93/68/ EEC] and Low Voltage Directive [73/ 23/ EEC], ElectroMagnetic
Compatibility [89/ 336/ EEC], amendments [92/ 31/ EEC] are fulfilled, as laid out in the
guideline set dow n by the member states of the EEC Commission.
T
his dec lara tion is valid for all s am ples th at are p art of th is declara tion , which are
manufactured according to the production charts appendix. The standards relevant for
the evalu atio n o f safety & EM C re qu irem en ts are a s fo llows :
LVD : EN 60950-1:2001
EMC : EN 55022:1998+A1:2000+A2:2003, EN 55024:1998+A1:2001+A2:2003
EN61000-3-2:2000, EN61000-3-3:1995+A1:2001
1. Certifica te o f con form ity / Test re po rt iss ue d by :
2. Technical documentation kept at :
w h ich will be m ade available u pon request.
(Manufacturer)
(
Re
p
resentative in the EU
)
Laser Beam Printer
(Produ ct nam e)
ML-3051ND, ML-3051N, ML-3050
(Mod el Num b er)
LVD : SEMKO
EMC : S AMSU NG Electronics EURO QA La b. in U.K.
Samsung Electronics Co., Ltd.
Sam s ung Electronics Co., Ltd.
#259, Gongda n-Dong, Gum i-City,
Gyeon gBuk, Korea. 730-030
Whan-Soon Yim / Senior Manager
(place and date of issue) (nam e and signature of a uthorized person)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
Yong-Sang Park / Manager
(place and date of issue) (nam e and signature of authorized person)
z z { jUS sU Y][YW`S z OzP yS ~ oT
{UpkSzwSwUyUjSwatY][