Samsung ML-3051N Printer User Manual


 
2.5 <
System setup>
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and point size.
Item Explanation
Typeface
You can select the standard font to be used in PCL
emulation.
PCL1~PCL7’s interval between letters is fixed, and
PCL8~PCL45’s interval is proportional to the font
type and point size. You can adjust the font size of
PCL1~PCL7 using the Pitch item, and
PCL8~PCL45 can do using
Point Size
item.
PCL46~PCL54’s interval and point size are fixed.
Symbol
This item selects the symbol to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Point Size
When you select one between PCL8 and PCL45 from
the
Typeface
menu, you can determine the font size by
setting the height of the characters in the font.
Courier
This item lets you select the version of Courier font to
use.
Pitch
When you select one between PCL1 and PCL7 from
the
Typeface
menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Lines
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The lines may
differ according to the paper size and printing
orientation.
Values: PCL1 ~ PCL54
Values: ROMAN8 ~ PCCYRIL
Values: 4.00 ~ 999.75 (0.25 unit)
Values: Regular, Dark
Values: 0.44 ~ 99.99 (0.01 unit)
Values: 5 ~ 128
PostScript
This menu provides you with the Print PS Error menu item.
EPSON
This menu sets the EPSON emulation configuration.
Item Explanation
Print PS
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
•Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
If this menu is set to Off, the job is flushed without an
indication of the error.
Item Explanation
Font
You can select the standard font will be used in
EPSON emulation.
Character
Set
This item allows you to select a character set of the
desired language.
Character
Tab.
This item selects the character set.
Pitch
You can determine the font size by setting the number
of characters that will print in one horizontal inch of
type.
LPI
You can set the number of lines printed in one vertical
inch.
Auto
Wrap
This item determines whether or not the printer
automatically performs line feed when the data
overflows the printable area of the print material.
Values: On, Off
Values: SANSERIF, ROMAN
Values: USA, FRANCE, GERMANY, UK,
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
Values: ITALIC, PC437US, PC850
Values: 10, 12, 17, 14, 20
Values: 6, 8
Values: Off, On