Filter
Top Products
A.
Monitor
B.
Mounting interface pad
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
3. Remove four screws and then remove the Stand from the LCD monitor.
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with
four screws that came with the arm-type base, wall mount hanger or other base.
To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to
mount the monitor at least 10cm away from the wall surface.
Contact the nearest Samsung Service Center for more information.
Samsung Electronics will not be responsible for damages caused by using a base other than
those specified.
3. Installing the Wall mount kit
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components(Sold separately)
A
Wall-Bracket
B
Set-Bracket
C
Screw: 8EA
D
Wood Screw:
4EA
E
Anchor:
4EA
F
Installation Guide
How to assemble the Wall Mount Bracket
1
1. Mark the location of hole on the wall.
2. Make over 35mm-depth-hole on the marked location using drill.
3. Fix anchors
E
on each hole on the wall.
4. Connect wall-bracket
A
to the wall with wood screws
D
after fitting
anchors
E
into the wall-bracket
A
.
2
1. Turn the power off and unplug the power cord from the outlet.
2. Place the TV faced down on a soft cloth or cushion on a table.
3. Attach the set-bracket
B
onto the rear side of the TV set and secure the screws
C
.