Filter
Top Products
OSD Description Play
Area
Configuration
When you turn the power on of the product for the first time since it released
from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting
MENU-
Setup-Area Configuration
.
This product can be used worldwide when area configuration is
set up regardless of broadcasting type.
When country is not selected properly, the product may not
locate channels.
Area Configuration is not available when the V-chip feature
has been set.
Language
You can choose one of 15 language.
The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Sleep Timer
Use to set the Monitor to be turned off automatically in certain minutes.
1) Off 2) 30 3) 60 4) 90 5) 120 6) 150 7) 180
Menu
Transparency
Changes the opaqueness of the background of the OSD.
1) High
2) Medium
3) Low
4) Opaque
Blue Screen
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
1) Off
2) On
Reset
Picture parameters are replaced with the factory default values.
- Available in PC Mode Only
1) Image Reset
2) Colour Reset
1
)
Ima
g
e Reset
2) Colour Reset