Filter
Top Products
3. Insert the stand into the hole at the bottom of the monitor.
Insert the screw into the hole indicated and tighten it. (M4 × L15)
This stand is designed for adjusting the screen angle. The company is not responsible for any
problem caused when using this stand. Under no circumstances use the product as a stand for
placing something on.
2. Installing the Stand Kit (sold separately)
1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand
kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2. Ensure that the parts are inserted in the right direction and in the right place. (M4 × L15)
3. Insert the stand into the hole at the bottom of the monitor.
4. Insert the screw into the hole indicated and tighten it. (M4 × L15)
Using a Power cord with Earth
In the event of failure, the earth lead may cause electric shock. Make sure to
wire the earth lead correctly, before connecting the AC power. When un-
wiring the earth lead, make sure to disconnect the AC power in advance.
AV input devices such as DVD players, VCR's or camcorders as well as your computer can be
connected to the monitor. For detailed information on connecting AV input devices, refer to the User
Controls under Adjusting Your Monitor.