Filter
Top Products
1) Red
2) Green
3) Blue
If you adjust picture using Color Control function, Color Tone will turn to Custom mode.
Image Lock Image Lock is used to fine-tune and get the best image by
removing noise that creates unstable images with jitters and
shakiness. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use
Fine again.
- Available in PC/BNC Mode Only
1) Coarse
: Removes noise such as vertical stripes. Coarse adjustment
may move the screen image area. You may relocate it to the
center using the horizontal control menu.
2) Fine
: Removes noise such as horizontal stripes. If the noise
persists even after fine tuning, repeat it after adjusting the
frequency (clock speed).
3) Position
: Adjusts the screen location horizontally and vertically.
1) Coarse
/ Fine
3
)
Position
Auto
Adjustment
The values of Fine, Coarse, Position are adjusted
automatically.
By changing the resolution in the control panel, the auto
function is performed.
- The direct button on the remote control is 'AUTO'
button.
- Available in PC/BNC Mode Only
Signal
Balance
This is used to make up for the weak RGB signal transmitted
by a long signal cable.
1) Signal Balance
Selects either On or Off with the signal control.
2) Signal Control
Adjusts the R Phase, G Phase, B Phase, Gain and
Sharpness manually.
1) Signal
Balance
2) Signal
Control
Size The Size can be switched.
1) 16:9
2) 4:3
PIP Picture Adjusts the PIP Screen Settings.
1) Contrast
: Adjusts the Contrast of the PIP window on the screen.
2) Brightness
: Adjusts the Brightness of the PIP window on the screen.
3) Sharpness
: Adjusts the difference between the lightest and darkest
areas of the PIP window.
4) Color
: Adjusts the Color of the PIP window on the screen.
5) Tint
: Adds a natural tone to the PIP window.
Available Modes : PIP
AV / S-Video / Component Mode