English English ItalianoFrançais Español Deutsch Português
13
Display Timing
This screen displays the settings that are available to your
monitor. This screen only displays this information;
you cannot select a new setting.
1
With the menu off, push the MENU button. Push the $
button or % button until the “Display Timing” screen
is displayed.
2
Push the button to display the factory timing screen.
3
Use the ▲ button or ▼ button to display the user and
factory timings.
Video Input Level
This feature will select the video signal level.
1
With the menu off, push the MENU button.
Push the $ button or % button until the “Video Input
Level” screen is displayed.
2
Push the button to open the video input level
selection screen.
3
Use the $ or % buttons to select 0.7 V or 1.0 V.
NOTE: Some video cards use video signals higher than 1.0 V
which causes the display to be very bright.
For those video cards, select 1.0 V.
.
Chapter Three: Adjusting Your Monitor
