Filter
Top Products
14
3
Chapter Three: Adjusting Your Monitor
Sync. Input Type
Use this menu to set your monitor to the correct type of
synchronization. Select “Separate” if the computer is
sending a separate synchronization signal.
Select “Sync. On Green” if the computer expects the
monitor to synchronize with the green signal it sends.
Refer to your computer or video card user’s manual to
determine the correct setting.
1
With the menu off, push the MENU button. Push the
$ button or % button until the “Sync. Input Type”
screen is displayed.
2
Push the button to open the sync input type
selection screen.
3
Use the ▲ button or ▼ button to select “Separate” or
“Sync. On Green”.
Exit
Once you are finished making adjustments to a feature, use
this menu to turn off the on-screen menu system.
1
Once you are finished making adjustments to a feature,
push the MENU button.
2
Push the $ button or % button until the “Exit” screen
is displayed.
3
Push the MENU button to turn off the menu.
NOTE: An alternative method is to repeatedly push
the button until the on-screen menu disappears.
Exit
Exit
Exit
▲
▲
G
Hz
▲
▲
▼
▲
Sync. Input Type
Previous Menu
Separate
Sync. on Green
▲
▲
G
Hz
▲
▲
SE-900IFT-E 4/29/92 5:23 PM Page 14