Filter
Top Products
14
Mobile Hotspot Home Page
The Mobile Hotspot web portal
Home
page lists the following
basic status information and options:
Internet Connection
•
Received
: For the current Internet connection, the amount of data
received from your Wireless Provider’s network.
•
IP Address
: Internet Protocol address assigned to your Mobile
Hotspot.
•
Transmitted
: For the current Internet connection, the amount of data
sent to your Wireless Provider’s network.
•
Mask
: The network mask associated with the
IP address
.
•
Connected Time
: For the current Internet connection, the period of
time which has elapsed since the connection was established.
•
Gateway
: The gateway IP address associated with the IP address
above.
•
Connect/Disconnect button
: Changes connection state with your
Wireless Provider’s mobile data network. Shows
Disconnect
when the
Mobile Hotspot is connected to your Wireless Provider’s mobile data
network. Shows
Connect
if your Wireless Provider’s mobile data
network is available but the Mobile Hotspot is not connected to it.
•
DNS
: The Domain Name Server currently used by your Mobile Hotspot.
WLAN
•
Profile
: The Wi-Fi (802.11) profile currently in use. (The default Profile
is Secure.) You can change this setting by selecting a different profile,
and clicking the
Apply
button next to the profile list.
•
Apply button
: Click or touch to save any change to the current WLAN
Profile. Select the desired profile, then click or touch this button.
Note:
Changing the current profile will disconnect all the current Wi-Fi
clients, including yours. You will need to reconnect using the Wi-Fi
settings for the new profile.
•
Network Name
: The SSID (network name) used by the current profile.
•
IP Address
: The IP address of this device, as seen by devices on the
WLAN (802.11 wireless network).
•
Security
: The security method used by the current profile.
•
Mask
: The network mask associated with the IP address above.
•
Users
: The number of users (wireless clients) connected to this device,
and the number of wireless clients allowed. This is presented in the
form
number connected /number allowed
.