Filter
Top Products
3-5 Using
Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in <PC> or <HDMI> mode, you can manually set the input signal.
In <PC> mode, <Video Type> is only enabled if the input signal is AV Timing (D-Sub). However,
for a separate H/V sync., <Video Type> is only enabled for the 1280 x 720p 59.94 Hz/60 Hz
signals.
In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and
1280x720p 59.94Hz/60 Hz signals.
• <Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)> : <PC> mode
• <Auto>-<PC>-<AV> : <HDMI> mode
Caption The <Caption> function is supported when the external analog signal (from either the Video or S-
Video terminal) contains subtitles.
The <Caption> function will not operate in <PC> (including components) or <HDMI> mode.
Depending on the external signal, a change to the channel or <Field> settings may be required.
Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on
<Channel><2>.)
• <Caption> : <Off>-<On>
• <Mode> : <Caption>-<Text>
• <Channel> : <1>-<2>
• <Field> : <1>-<2>
MENU DESCRIPTION