Samsung SP-L301 Projector User Manual


 
1-3 Major Safety Precautions
Caution
Installation Related
Warning
When unplugging the power plug from the
wall outlet, make sure to hold the power
plug by the plug and not by the cord.
Failing to do so may result in electric
shock or fire.
Do not turn the product on or off by plug-
ging or unplugging the power plug. (Do not
use the power plug as a power switch.)
Unplug the power plug before cleaning the
product.
There is a danger of electric shock or
fire.
Keep the power cord away from sources of
heat.
Connect the power plug to a wall outlet
that can be easily reached.
When a problem occurs with the
product, you must unplug the power
plug to cut the power off completely.
You cannot cut the power off
completely using only the power button
on the product.
Avoid installing the product in a location
exposed to direct sunlight and installing
the product near a heat source such as a
fire or heater.
This may shorten the product life cycle
or cause fire.
Avoid installing the product in a badly-ven-
tilated location such as inside a bookshelf
or closet.
Otherwise, it may result in fire due to
internal overheating.
When installing the product in a cabinet or
shelf, take care so that the front end of the
product is completely supported by the
cabinet or shelf.
Failing to do so may result in the
product falling and resulting in damage
to the product or injury.
Make sure to use a cabinet or shelf
suitable to the size of the product.
When installing the product on a console
or shelf, make sure that the front of the
product does not protrude out of the con-
sole or shelf.
Otherwise, this may cause the product
to fall off and result in a malfunction or
injury.
Keep the power cord away from heaters.
The coating of the power cord may
melt and cause electric shock or fire.
When thunder or lighting occurs, unplug
the power cord.
Failing to do so may result in electric
shock or fire.
Do not install the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and do not
install it in a vehicle.
This may result in electric shock or fire.
Do not install the product in areas with
heavy dust.