Filter
Top Products
4-12
ESC U
[Name] Turn unidirectional printing mode on/off
[Format] ASCII ESC U n
Hex 1B 55 n
Decimal 27 85 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Turns unidirectional printing mode on or off.
- When the LSB of n is 0, unidirectional printing mode is turned off.
- When the LSB of n is 1, unidirectional printing mode is turned on.
ESC a
[Name] Select justification
[Format] ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Default] n = 0
[Description] Aligns all the data in one line to a specified position, using n as follows:
n Justification
0, 48 Left justification
1, 49 Centering
2, 50 Right justification
ESC c 3
[Name] Select paper sensor(s) to output paper end signals
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Default] n = 15
[Description] Selects whether to output paper end signals to a parallel interface or not when a paper end is
detected by the sensor selected, using n as follows:
Bit On/Off Hex Decimal Function
Off 00 0 Paper near end sensor disabled.
0
On 01 1 Paper near end sensor enabled.
Off 00 0 Paper near end sensor disabled.
1
On 02 2 Paper near end sensor enabled.
Off 00 0 Paper end sensor disabled.
2
On 04 4 Paper end sensor enabled.
Off 00 0 Paper end sensor disabled.
3
On 08 8 Paper end sensor enabled.
4-7 - - - Undefined