Filter
Top Products
CHAPTER 4
Control commands list
4-13
ESC c 4
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Selects whether to stop printing or not when the paper runs out using n as follows:
Bit Off/On Hex Decimal Function
Off 00 0 Paper near end sensor disabled.
0
On 01 1 Paper near end sensor enabled.
Off 00 0 Paper near end sensor disabled.
1
On 02 2 Paper near end sensor enabled.
2-7 - - - Undefined
ESC c 5
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Enables or disables the panel buttons.
- When the LSB of n is 0, all buttons are enabled.
- When the LSB of n is 1, all buttons are disabled.
ESC d
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Default] None
[Description] Prints the data in the print buffer and feeds n lines.
ESC e
[Name] Print and reverse feed n lines
[Format] ASCII ESC e n
Hex 1B 65 n
Decimal 27 101 n
[Range] 0 ≤ n ≤ 1
[Default] None
[Description] Prints the data in the print buffer and feeds n lines in the reverse direction.