Filter
Top Products
4-24
GS I
[Name] Transmit printer ID
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 68, n = 33
[Default] None
[Description] Transmits 1 byte of printer ID which is specified by n as follows:
n Printer ID Specification
1, 49 Printer model ID Printer model
2, 50 Type ID Printer type
3, 51 Version ID Firmware version
Transmits printer information A (common information), using n as follows:
n Printer ID Specification
33 Type information Supported functions
Transmits printer information B (common information), using n as follows:
n Printer ID Specification
65 Firmware version Firmware version
66 Maker name BIXOLON
67 Printer model Printer model
68 Serial No Serial No of the printer
GS V
[Name] Select cut mode and cut paper
[Format] Function A ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
Function B ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] Function A m = 0, 1, 48, 49
Function B m = 65, 66; 0 ≤ n ≤ 255
[Default] None
[Description] Select a paper cutting mode using m and then cut the paper, as follows:
m Function
0,48 Executes a full cut (cuts the paper completely).
<A>
1,49 Executes a partial cut (one point left uncut).
65
Feeds paper to (cutting position + n × vertical motion unit) and executes
a partial cut(one point left uncut).
<B>
66
Feeds paper to (cutting position + n × vertical motion unit) and executes
a partial cut(one point left uncut).
[Note for <A>] • If an auto cutter is not provided, this command is ignored.
[Notes for <B>] • When n = 0, the printer feeds the paper to the cutting position and cuts it.
• If an auto cutter is not provided, the printer only feeds the paper for specified amount.
• Vertical motion unit is used for calculating a paper feed amount.