Filter
Top Products
12_ Connecting with Other Equipment
connecting with other equipment
Connecting PC Based DVR
- Connect SSC-5000 through the RS-485 port in the back
of PC Based DVR.
- Connect SIGNAL (+) in the RS-485 port of PC Based DVR
with TX (+) of SSC-5000.
- Connect SIGNAL (-) in the RS-485 port of PC Based DVR
with TX (-) of SSC-5000.
CONNECTING TO PC USING USB PORT
You can use the provided USB cable to connect to the PC with uploading software for updating software of the
System Keyboard.
CONNECTING OTHER SYSTEM KEYBOARD
It is possible to connect and use max. 32 keyboards simultaneously.
Refer to the “ADDRESS SET” part in “RS-485 Communication Setup” of “Menu Setup” for the setting of keyboard
communication.
(see page 22)
Do not use together with the SSC-2000/SSC-1000 because it is different with the SSC-2000/SSC-1000 in
communication method.
In case of connecting with Half Duplex
- Connect the TX (+) of SSC-5000 port with the
TX(+) of another SSC-5000.
- Connect the TX (-) of SSC-5000 port with the TX(-)
of another SSC-5000.
In case of connecting with Full Duplex
- Connect the TX (+) of SSC-5000 with the TX (+) of
another SSC-5000.
- Connect the TX (-) of SSC-5000 with the TX (-) of
another SSC-5000.
- Connect the RX (+) of SSC-5000 with the RX (+) of
another SSC-5000.
- Connect the RX (-) of SSC-5000 with the RX (-) of
another SSC-5000.
W
W
<SPR-9XXX Series>
<SPR-7XXX Series>