English _23
M MENU SETUP
Protocol Port1/Port2
The protocol of the RS-485 communication can be set.
RS-485 communication of the system keyboard supports Camera
Protocol as follows.
Choose one protocol among SAMSUNG / Pelco-D / Pelco-P / Vicon /
Panasonic / Kalatel / Diamond / AD / Philips / Erna / VCL TP / Techwin /
Honeywell.
You can control two protocols simultaneously by specifying different protocols
for Port 1 and Port 2.
The multimedia protocol provided by us may not be supported depending on the
installation conditions. Please contact us or the store of your purchase if you have a
problem or question about installing the protocol.
Baud Rate
The Baud Rate of the RS-485 communication can be set.
Press <Baud Rate> and a pop-up window will appear as shown in
the right fi gure.
RS-485 communication of the system keyboard supports Baud Rate
as follows.
1200/ 2400/ 4800/ 9600/ 19200/ 38400.
Among these 6 kinds of Baud Rate, select one Baud Rate.
Duplex
You can set the duplex mode of system keyboard.
Press <Duplex>, and then the following window pops up.
Full Duplex / Half Duplex.
Select one of the two duplex.
Press the <EXIT> icon on the lower left to fi nish RS-485 COMMUNICATION SETUP
control and return to the KEYBOARD SETUP screen.
CHANGE PASSWORD
This function is to change the operator's password of the system keyboard.
At fi rst, enter the current Operator No. and Password.
Correctly entered, the screen will change into a window as follows.
M
M
1.
2.
1.
2.
M
1.
2.
RS-485 Communication Setup
Keyboard
Setup
¨Address Set 0
¨Protocol 1(Port 1) SAMSUNG
¨Protocol 1(Port 2) SAMSUNG
¨Baud Rate 9600
¨Duplex Half Duplex
RS-485 Commun
i
cat
i
on Setup
Ke
y
board
S
etu
p
SAMSUNG
Pelco-D
Pelco-p
Vicon
Panasonic
Kalatel
Diamond
AD
Philips
Erna
VCL TP
Techwin
Honeywell
RS-485 Communication Setup
Keyboard
Setup
¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG
¨Baud Rate 9600
¨Duplex Half Duplex
RS-485 Communication Setu
p
Key
b
oar
d
S
etu
p
1200
2400
4800
9600
19200
38400
RS-485 Communication Setup
Keyboard
Setup
¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG
¨Baud Rate 9600
¨Duplex Half Duplex
RS-485 Communication Setu
p
Key
b
oar
d
S
etu
p
Full Duplex
Half Duplex
Change Password
Clear
Keyboard
Setup
Enter
Enter Operator No.
Enter Password
Clear
Keyboard
Setup
Enter
Enter New Password
Con rm New Password
¾¾¾¾¾¾
¾¾¾¾¾¾
Change Password
RS-485 Communication Setup
Keyboard
Setup
¨Address Set 0
¨Protocol 1(Port 1) SAMSUNG
¨Protocol 1(Port 2) SAMSUNG
¨Baud Rate 9600
¨Duplex Half Duplex
RS-485 Communication Setu
p
Ke
yb
oar
d
S
etu
p
SAMSUNG
Pelco-D
Pelco-p
Vicon
Panasonic
Kalatel
Diamond
AD
Philips
Erna
VCL TP
Techwin
Honeywell