Filter
Top Products
6_ general facts
general facts
NAME AND FUNCTION OF EACH PART
Front side
Name Function
LCD Display
It shows the operating status of the system keyboard..
Camera movement button
PRESET, PATTERN, SCAN, AUTO PAN
ALARM RESET button
Use this to set on or off the alarm.
Camera lens button
IRIS control (IRIS CLOSE/OPEN)
FOCUS control (FOCUS NEAR/FAR)
ZOOM control (ZOOM TELE/WIDE)
-
-
-
Joystick controller (UP/
DOWN/LEFT/DOWN/ZOOM)
The Pan/Tilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/
DOWN/LEFT/RIGHT. Press the button on the top of Joystick to control the Auto Focus. And
use for the zoom control by turning to the clockwise or counterclockwise. The function of
UP/DOWN/LEFT/RIGHT keys is controlled in the menu screen of the connected controller.
Press the button of the top to execute ENTER motion.
Device select button
(MON/CAM/VMS/DVR)
This key is to select Camera, Monitor, DVR or others.
DVR control button
(SEQUENCE, MODE)
SEQUENCE : Executes the SEQUENCE function of DVR.
MODE : Executes the partition screen selection function of DVR.
-
-
Number (0~9),
ENTER, CLEAR button
This key is to select Camera, Monitor, DVR, Preset, Pattern Number, or others.
MENU button
This key is to go into the menu mode for the setup of various devices.
Jog shuttle
JOG : Is in use for Forward / Reverse Frame search in the playback mode of DVR.
Shuttle : Executes the Play / Reverse Play / FF / REW functions in the playback mode of
DVR.
-
-
DVR Play button
PLAY/PAUSE, STOP, FAST FORWARD, REWIND, RECORD
AUX 1, 2, 3, 4 button
Controls the AUX output of the receiver unit.