Power Supply
AC 100-240~ VAC ( ± 10%),60 / 50Hz ± 3Hz
Signal Cable
15pin-to-15pin D-sub cable, Detachable
DVI-D to DVI-D connector, Detachable
Dimensions (W x H x D) / Weight
520.0 X 452.0 X 202.0 mm / 20.5 X 17.8 X 8.0 inch / 7.7kg / 17.0Ibs(With stand)
520.0 X 399.0 X 68.5 mm / 20.5 X 15.7 X 2.7 inch (Without Stand)
VESA Mounting Interface
100 x 100mm
Environmental considerations
Operating Temperature: 10℃~ 40℃ (50°F~104°F)
Humidity: 10% ~ 80%, non-condensing
Storage Temperature: -20℃~ 45℃ (-4°F~113°F)
Humidity: 5% ~ 95%, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color
seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and
you can use it without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 5,292,000.
Design and specifications are subject to change without prior notice.
Class B Equipment
(
Information Communication equipment for residential use
)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be
used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed
in your computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation Power saving mode
Power off
(Power button)
EPA/ENERGY 2000