Samsung TX-WN Personal Computer User Manual


 
38
Using "Windows Embedded Standard 7" (TX-
WN)
2
2 Using "Windows Embedded Standard 7" (TX-WN)
z Using the Standalone restore solution
Restore the system using a restore image saved on the product.
1 After the power is connected, press the Home key immediately after the system starts during
boot to enter the boot menu.
2 Select the Recovery Mode menu and press the P key to enter "admin" which is the password.
3 Run the Recovery Mode menu by pressing the Enter key.
4 If the PROMPT "root@xxxxx:/#" appears, enter "recovery" to restore the system.
5 If PROMPT appears after a message informing that the system is successfully restored, run the
reboot command to restart the system.
DISK is configured as follows. Deleting or changing partitions may disable booting or the
Standalone restore solution.
Data saved by the user and customized settings are deleted after a system restore.
BOOT_AGENT WES7 BACKUP
Drive Letter is not defined C: Drive Letter is not defined