Filter
Top Products
Page 49
Link Test
The Link Test dialog window is used to examine the quality of the data
transmission between the Wireless LAN Card and any device on the network.
IP Layer Link Test
The IP Layer link test is used to check the quality of transmission between
your computer and remote or local devices.
1. From the Remote Address drop down menu, select the address of a
device on the network that is not connected to your computer.
2. From the Local Address drop down menu, select the address of your
computer, or manually enter the address.
3. Enter a Ping Interval (a query to determine whether an IP address is
accessible). The Ping Interval is shown in milliseconds.
4. Enter a Packet Size.
5. Click the Ping button.
6. Click the Refresh button to set the counters to zero.
7. To stop the test, click Ping again
The results of the IP Layer link test appear on the right side of the dialog box.
Packet Count is the number of packets sent.
Failure Count is the number of failed packets.