Sanyo PDP-32H1AN Computer Monitor User Manual


 
39
APPENDIX
This function activates due to the temperature inside Plasma Monitor. When the temperature inside Plasma
Monitor exceeds the normal, after displaying a message, Plasma Monitor will be turned off automatically.
INFORMATION MENU
The "information" menu displays a condition of internal temperature, a condition of cooling fan, and informations
of input video signal .
Temperature
Temperature
OK
OK
Cooling fan
Cooling fan
OK
OK
Signal
Signal
Video
Video
480i/525i
480i/525i
MENU : Return STATUS : Exit
MENU : Return STATUS : Exit
Information
Information
Press MENU button and ON-SCREEN MENU will appear.
1
Press button to select "Information" menu and then press
OK button. "Information" menu will appear.
2
"Information" MENU
When "Temperature" or "Cooling fan" is displayed "NG", turn
off Plasma Monitor and contact
sales dealer where you
purchased the Plasma Monitor or the service center.
When the message "Warning! Internal temperature is too high." is displayed.
INTERNAL TEMPERATURE MONITOR
When this message is displayed, the internal temperature of Plasma monitor exceeds normal. After displaying
this message for 10 seconds, Plasma Monitor will be turned off automatically. When Plasma Monitor cooling
down to normal, Plasma Monitor can be turned on again by pressing POWER button. If this message is
displayed often, contact sales dealer where you purchased the Plasma Monitor or the service center.
AUTO POWER OFF
When a trouble is detected in the Plasma Monitor, the protection function works and turn the Plasma Monitor
OFF automatically. When the Plasma Monitor is turned OFF with this function, the POWER indicator flashes and
Plasma Monitor's power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the Plasma Monitor or the service
center.
To turn the Plasma Monitor again for checking ;
1) Disconnect Power cord from AC outlet and plug it on again.
2) Press POWER button and attempt turn ON Plasma Monitor.
If Plasma Monitor is not turned ON, disconnect Power cord and contact to service center.