Sanyo PLV-Z1 Projector User Manual


 
11
Part Names and Functions
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to page
17.)
S-VIDEO INPUT JACK
Connect the computer
output to this jack.
(Refer to page 18.)
COMPUTER INPUT
TERMINAL
*
SERVICE PORT JACK
This jack is used to service
this projector.
Connect the composite
video output from video
equipment to VIDEO jack.
(Refer to page 17.)
VIDEO INPUT JACK
(VIDEO)
Connect the component video
outputs to Y, Pb/Cb, and Pr/Cr
jacks.
(Refer to page 17.)
COMPONENT VIDEO INPUT JACK
(
Y-Pb/Cb-Pr/Cr
)
Terminal
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to
be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use
the RESET function excessively.
*