Sanyo PLV-Z1 Projector User Manual


 
37
Computer Input
Adjustment of horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button to decrease/increase
value to match the resolution of image.
Display area H
Adjustment of vertical area displayed with this projector. Press the POINT LEFT/RIGHT button to decrease/increase value
to match the resolution of image.
Display area V
When this function is on, SXGA image is fully displayed at 4 : 3 aspect ratio. It is displayed at 5 : 4 aspect ratio with this
function off.
Full screen
Reset
Store
Close the Computer Adjustment menu.
Quit
To store the adjustment parameters, select the Store and press the POINT RIGHT button. Choose one of the Mode 1 to 5,
and press the SELECT button.
Reset all adjustment before the data is stored. (The Reset does not work for the stored data.)
Mode free
To clear the adjustment parameters previously set, select the Mode free and press the POINT RIGHT button. Choose the
mode that you want to clear, and then press the SELECT button.
NOTE : The Display area, Display area (H/V) and Full screen cannot
be adjusted when 1035i (HDTV) or 1080i (HDTV) is
selected in the Computer System Selection menu (p32).
Select the area displayed with this projector. Select the resolution at
the Display area dialog box.
Display area
Display area
Press the POINT RIGHT button
at the Display area and the
Display area dialog box appears.
NOTE : The Full screen cannot be selected after the Display area, Display area H, and Display area V are adjusted.