Filter
Top Products
58
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
Command Function
Projector
Return
Projector status
CR0
Status Read
00
Power ON
80
Standby mode
20
Cooling Down
10
Power Failure
28
Cooling Down due to Abnormal Temperature
in process
21
Cooling Down in process after Off due to lamp
failure
81
Standby after Cooling Down due to lamp
failure
CR1
Input Mode Read
CR3
Lamp Time Read
CR4
Setting Read
CR6
Temperature Read
S1
S1 = Temperature at Sensor 1 (˚C)
(ex.) S1 = 12.3˚C
--> The projector displays “12.3
CR7
Lamp Mode Read
The tables on pages
56~58 show the typical
command lists for con-
trolling the projector.
Please consult your
local dealer for further
information of other
commands.
N
o
t
e