Sanyo PLC-EF12NL Projector User Manual


 
40
COMPUTER MODE
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT (REAR CLICK) button. Another dialog
box PICTURE IMAGE ADJUSTMENT Menu will appear.
1
2
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.)
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
Point to to decrease contrast, and select to increase contrast.
(From 0 to 63.)
Point to to adjust the image darker, and select to adjust
brighter. (From 0 to 63.)
Close the PICTURE IMAGE
ADJUSTMENT Menu.
Move the arrow to
or and press
SELECT (REAR
CLICK) button.
Recalls the data previously adjusted.
Reset
Stores the adjusted data in the memory.
Stored
Closes the PICTURE IMAGE ADJUSTMENT Menu.
Quit
Move the arrow to the color that you want to adjust. Point to to
lighten the color and select to deepen the color. (From 0 to 63.)
Each of the keys operates as follow.
Fine sync
Total dots
White balance (Red / Green / Blue)
Contrast
Brightness
Point to to soften the image, and select to sharpen the image.
(From 0 to 31.)
Sharpness
PICTURE IMAGE ADJUSTMENTS
NOTE : This menu cannot be operated when the
incoming signal is digital or RGB,
HDTV720p, HDTV1035i or HDTV1080i
is selected on the SYSTEM MENU (P36
and 37).
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT (REAR CLICK) button.