Sanyo PLC-EF12NL Projector User Manual


 
7
PREPARATION
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
Keep heat-sensitive objects away from the
exhaust port.
If you set the projector on top of a metallic
surface, the surface will become hot
because of the hot air exhaust. Be careful
when handling.
Do not touch the cabinet near to the
exhaust vent area, and especially screws
and metallic parts. These parts will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
LAMP COVER
AIR INTAKE VENT
PROJECTION LENS
SPEAKERS
INFRARED
REMOTE RECEIVER
REMOVABLE
LENS COVER
POWER CORD
CONNECTOR
EXHAUST VENT
MAIN ON / OFF
SWITCH
INFRARED
REMOTE RECEIVER
CARRYING HANDLE
ADJUSTABLE FEET
FRONT OF THE PROJECTOR
REAR OF THE PROJECTOR
BOTTOM OF THE PROJECTOR
NAME OF EACH PART OF THE PROJECTOR
AIR INTAKE
VENT