Sanyo PLC-XP51 Projector User Manual


 
21
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1
Press ZOOM button on Top Control or ZOOM / button on
Remote Control Unit. Message Zoom is displayed.
2
Press ZOOM button or POINT UP button to make image
larger, and press ZOOM
button or POINT DOWN button to
make image smaller.
1
Press FOCUS button on Top Control or FOCUS / button on
Remote Control Unit. Message Focus is displayed.
2
Adjust focus of image by pressing FOCUS / button or
POINT UP/DOWN button(s) .
LENS SHIFT ADJUSTMENT
1
Press LENS SHIFT button on Top Control or LENS SHIFT /
button on Remote Control Unit. Message Lens shift is
displayed.
2
Press POINT UP button or LENS SHIFT button to move
image up, press POINT DOWN or LENS SHIFT
button to
move image down.
KEYSTONE ADJUSTMENT
1
Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 37.) Keystone
dialog box appears.
2
Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to
reduce the upper part of the image, and press POINT DOWN
button to reduce the lower part. Press POINT LEFT button to
reduce the left part, and press POINT RIGHT button to reduce
the right part.
Reduce the upper width
with POINT UP button.
Reduce the lower width
with POINT DOWN button.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
Reduce the left part with
POINT LEFT button.
Reduce the right part with
POINT RIGHT button.
Arrows are white in no correction.
Arrow(s) of direction being corrected turn(s) red.
Arrow(s) disappear(s) at the maximum
correction.
If you press the KEYSTONE button on Top
Control or on Remote Control Unit once more
while the keystone dialog box is being
displayed, the keystone adjustment will be
canceled.
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.