Sanyo PLC-XP51 Projector User Manual


 
54
APPENDIX
OPTIONAL PARTS
The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer.
Control Cable (PS2 Port) Type No. : POA-MCPS2
Control Cable (ADB Port) Type No. : POA-MCMAC
MAC Adapter Type No. : POA-MACAP
DVI Cable Type No. : KA-DV20
HDB 15 pin-SCART 21 pin Cable Type No. : POA-CA-SCART
Long Zoom Lens Type No. : LNS-T31A
Ultra Long Zoom Lens Type No. : LNS-T32
Short Zoom Lens Type No. : LNS-W31A
Short Fixed Lens Type No. : LNS-W32
PJ-Net Organizer Type No. : POA-PN02
LENS REPLACEMENT
The lens of this projector can be replaced with other optional lens which are sold separately. This feature enables you to use
the projector for wide variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced
by well-trained sales or service engineers. Do not attempt to do by yourself as it may cause injury.
To the sales and service engineer;
Referring to the attached lens replacement and installation manual, replace or install the lens properly.
After installing the lens, attach the lens cap to the lens when setting up the projector.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.