Sanyo PLC-XP51 Projector User Manual


 
29
COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message D. Zoom + is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when image
is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM
button on Remote Control Unit.
1
To cancel Digital Zoom +/ mode, press any button except D.ZOOM
/, SELECT, POINT and LASER buttons.
Press POINT UP/DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
2
Wide
Digital zoom +
NOTE
True and Digital zoom +/ cannot be operated
when 480i, 575i, 480p, 575p, 1035i (HDTV)
or 1080i (HDTV) is selected on PC SYSTEM
Menu (P24).
Wide cannot be selected when 720p (HDTV),
1035i (HDTV) or 1080i (HDTV) is selected on
PC SYSTEM Menu (P24).
This projector cannot display any resolution higher
than 1280 X 1024. If your computers screen
resolution is higher than 1280 X 1024, reset
resolution to lower before connecting projector.
Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
Provides image to fit screen size.
Normal
True
SCREEN MENU
When Digital zoom is selected, ON-SCREEN MENU disappears
and message D. Zoom –” is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
button on Remote Control Unit.
Digital Zoom
Provides image in its original size. When original image size is larger
than screen size (1024 x 768), this projector enters Digital zoom +
mode automatically.
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Move red frame to function and press
SELECT button.
SCREEN Menu icon